Front Frame
3/4″ thick kiln dried solid hardwood. Stiles 1-1/2″ wide, mulls 3″ wide, rails 1-3/4″ wide
End Panels
Nominal 1/2″ thick, multi-ply plywood dadoed to receive tops and bottoms.
Top and Bottom Panels
Nominal 1/2″ thick multi-ply hardwood plywood. Tops and boots set into grooved end panels, and front rails glued and stapled. Brooms are supported at rear oaf base cabinets by 1/2″ thick multi-ply hardwood plywood.
Hanging Rails
Wall cabinets have 1/2″ thick by 2-7/8″ high multi-ply hardwood plywood hanging rail running full cabinet width at top and bottom. Base cabinets have 1/2″ by 2/7/8″ high multi-ply hardwood plywood
Back Panel
1/8″ thick hardwood plywood
Shelves
5/8″ thick multi-ply hardwood plywood, with hardwood veneer banded front edge. Shelves are adjustable in all standard wall and base cabinets.
Toe Kick
1/2″ thick multi-ply hardwood plywood. Toe kick is 4” high and recess 4“
Base I-Beam Braces
Two 1/2” thick by 2-7/8” wide plywood braces running full depth front to back of cabinet, recessed down 1” from top. All braces are glued and stapled at top of cabinet to front frame and hang rail, and dadoed into end panel.
Drawers
1/2” thick solid wood front, back and sides with dovetail construction. Drawer bottoms are 1/4” thick, multi-ply hardwood inserted and stapled into dado in front, back and sides.
Drawer guides
High quality epoxy coated steel, Custom-Tec, side mounted guides, self-adjusting in mounting brackets. Built-in stop, self-closing and stay-closed features with a 75 lbs. rated load capacity.
Hinges
Heavy-duty, high quality steel, concealed 6-way adjustable hinge with self-closing feature.